velaco@vela.co.th

    6632 Precision Impedance Analyzer 10Hz~3/5/10/20/30MHz

    6632 Precision Impedance Analyzer 10Hz~3/5/10/20/30MHz

    The test frequency of the 6632 Precision Impedance Analyzer is DC 10Hz-30MHz and the test signal is 10mV-2Vrms (min. resolution 1mV), and is suitable for the LCR and DCR testes of AC signals. The measurement in a continuously changing environment can be executed stage-by-stage with the test frequency and grade, and high-speed continuous tests can be performed under different test and mode conditions. The machine also supports RS232, LAN, USB and GPIB PC connection capabilities to improve the design and test efficiency significantly. MICROTEST 6632 impedance analyzer also provides fixtures for material dielectric permittivity measurement that allows PCB designed engineers to reduce the faulty conditions with the comprehensive information of permittivity while designing PCB layouts.

    Share on:

    Description

    • Signal source frequency range: DC 10Hz ~ 3/5/10/20/30MHz
    • Signal source grade: 10mV ~ 2V / 200μA ~ 20mA
    • Basic accuracy up to ±0.08%
    • ALC function
    • Output resistance 25Ω/100Ω, switchable
    • Parameters: |Z|, |Y|, θ, R, X, G, B, L, C, D, Q, DCR, ESR, Vac, Iac, Vdc, Idc, ε and μr
    • Ultra-high measuring speed <3ms
    • Open circuit/short circuit/load calibration function
    • Electric meter mode, multistep list mode, scan & analyze mode
    • Up to four component parameters can be selected in the electric meter mode. The induction and DCR values can be measured and displayed simultaneously
    • Auto component classification: Comparator function and Handler BIN classification function
    • Up to 50 sets of multistep list programs can be stored in the permanent memory and up to 15 test steps can be arranged in each program
    • Built-in DC bias voltage -12 to +12V
    • Rapid automation and data access function is realizable for USB, LAN, GPIB and RS232 interfaces
    • PC connection data analysis software is available optionally
    • 7″ 800*480 TFT LCD color screen
    • Ultra-light design: 336*147* 340mm, 3kg
    • Ultra-low power consumption (<30W) without fans and zero noise

    Specification

     

     

     

    Test Frequency

    6330-3G10Hz ~ 3MHz
    6330-5G10Hz ~ 5MHz
    6330-10G10Hz ~ 10MHz
    6330-20G10Hz ~ 20MHz
    6330-30G10Hz ~ 30MHz
    Minimum Resolution100mHz, 6-bit Frequency Input
    Accuracy7 ppm±100mHz
    Basic Accuracy± 0.08%
     

     

     

    AC Measurement

    Test Signal Voltage Level 10mV  2Vrms
    Voltage Minimum Resolution1mV
    AccuracyALC ON:6% Voltage ± 2mV
    ALC OFF
    :10% * Voltage ± 2mV
    Test Signal Current Level200µA – 20mArms
    Current Minimum Resolution10µA
    AccuracyALC ON:6% Current ± 20µA
    ALC OFF
    :10% * Current ± 20µA
    Test Time  (The fastest)< 3mS
    Output Impedance25Ω/100Ω, switchable (Nominal value)
    Parameters|Z||Y|、θ、XRGBLDQDCRC、 Vdc-IdcESR、ε and μr
    Measurement ModeMeter mode, Graphic scanning*, Multi-steps mode

    Marked with* graphic scanning function only applies to G series model

    CalibrationOpen Circuit/ Short Circuit/Load Calibration
    Measurement CircuitSeries/Parallel
    Equivalent Circuit AnalysisThree elements、Four elements     * This function is option 
    Multi-steps Mode50 groups of Multi-steps setting (Each group contains up to 15 steps)
    Built-in DC bias voltage-12 to +12V, 100Hz to 30MHz
    PC LINK / CPKOption
    Flash MemoryBuilt-in flash for setting 100 set documents
    USBLCR setting documents, BMP graphics, Test result data
     

    Interface

     

    I/O InterfaceHandler
    Serial InterfaceUSB、RS232
    Parallel InterfaceGPIB
    Display7.0”TFT, 800×480 Color Screen
    EnvironmentTemperature: 10℃ ~ 40℃   Humidity: ≦80%
    Power SupplyVoltage90V  264Vac
    Frequency47Hz ~ 63Hz
    Power ConsumptionLow power consumption: Maximum 30W (Nominal value)
    Dimension (W*H*D)336x147x340 mm
    Weight3 kg

     

    Parameters Measurement Ranges

    |Z|0.000 mΩ to 9999.99 MΩ
    R, X± 0.000 mΩ to 9999.99 MΩ
    |Y|0.00000 uS to 999.999 kS
    G, B± 0.00000 uS to 999.999 kS
    θRAD± 0.00000 to 3.14159
    θDEG± 0.000° to 180.000°
    Cs, Cp± 0.00000 pF to 9999.99 F
    Ls, Lp± 0.00 nH to 9999.99 kH
    D± 0.00000 to 9999.99
    Q± 0.00 to 9999.99
    Δ± 0.00% to 9999.99%
    Rdc0.00 mΩ to 99.9999 MΩ
    εr0 to 10000
    μr0 to 10000

     

    Applications

    Passive ComponentsCapacitor, Inductor, Resistor, Transformer, Ceramic resonator, Quartz Crystal
    Semiconductor ComponentsThe CV characteristics analysis of varactor diodes, Diodes
    Dielectric MaterialEstimation on permittivity and consumption tangent of plastic, ceramic and PCB
    Electromagnetic Material
    Other ComponentsEstimation of the impedance of PCB components